Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.A3.D3 — HP LaserJet M775dn Enterprise 700 color MFP

Code: 13.A3.D3

Display: 13.A3.D3
Description: Misfeed jam from tray 3. No-pick jam from tray 3. The leading edge of paper fed from Tray 3 is stopped before SR1 HCI Tray 3 media feed sensor PS3302 (sensor does not detect the leading edge of paper within a specified period), including a two time retry, after the HCI right cassette pickup solenoid is turned on.
Remedy: 1. Open Tray 3, remove any jammed paper, and then close the tray. 2. Inspect the Tray 3 pick, feed and separation rollers. Clean or replace if necessary. 3. Check the connectors at the feed sensor, solenoid, feed motor, and the controller PCA. 4. Use the Tray/bin manual sensor tests to toggle the Tray 3 feed sensor. If the sensor or lever is not properly functioning, replace the Tray 3 paper pickup assembly. 5. Use the Component tests to activate the Tray 3 solenoid (listen for the solenoid to activate). If the solenoid is not properly functioning, replace the Tray 3 paper pickup assembly. 6. Use the Component tests to activate the Tray 3 motor (listen for the motor to activate). If the motor is not properly functioning, replace the Tray 3 pickup motor.

← Xem tất cả mã lỗi HP LaserJet M775dn Enterprise 700 color MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie