Code: 60.00.05
Display: 60.00.0Y Tray <Y> lifting error
Description: Tray lift motors error
Media input Tray 5 lift-up motor (M82) failure or media input Tray 6 lift-up motor (M92) failure
Media input Tray 5 lift-up motor (M82) failure or media input Tray 6 lift-up motor (M92) failure
Remedy: 1. Use the Tray 5 paper surface sensor (SR82) or Tray 6 paper surface sensor (SR92) test in the Tray/Bin manual sensor test to verify that the sensor is properly functioning. If it is not, replace the lifter drive assembly. 2. Open and close Tray 5 or Tray 6 and listen at the back of the product for the sound of the lifter motor (M82 or M92) operating. If it does not operate, replace the lifter drive assembly. 3. If the product has been serviced, check the connector (J2003) on the paper feeder controller PCA, the intermediate connector (J702), and the connector (J2006) on the paper feeder controller PCA. TIP: Check the connector (J2006) on the paper feeder controller PCA associated with the tray. 4. If the error persists, replace the cassette tray.