Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.80.D1 — HP LaserJet M775z plus Enterprise 700 color MFP

Code: 13.80.D1

Display: 13.80.D1
Description: Stapler/stacker inlet sensor delay jam. The inlet sensor SR9 does not detect the leading edge of paper within a specified period after the leading edge reaches the fuser output sensor PS6 in the product.
Remedy: 1. Open right-middle door, and then remove any jammed media from the fuser. 2. Make sure that the paper meets HP specifications. 3. Check for an obstruction in the paper path inside the right upper door. 4. Defeat the upper right door sensors SW1, and then print a page. Verify that the stapler/stacker input rollers turn. If the rollers do not turn, replace the feed guide assembly.

← Xem tất cả mã lỗi HP LaserJet M775z plus Enterprise 700 color MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie