Code: 13.A6.D6
Display: 13.A6.D6
Description: Misfeed jam, from tray 6. No-pick jam from tray 6. The leading edge of paper fed from Tray 6 is stopped before SR91.
Remedy: 1. Open Tray 6, clear any jammed paper, and then close the tray. 2. Open the lower-right door, clear any jammed paper, and then close the door. 3. Inspect the Tray 6 pick, feed and separation rollers. Clean or replace if necessary. 4. Check the connectors at the feed sensor, solenoid, feed motor, and the controller PCA. 5. Use the Tray/bin manual sensor tests to toggle the Tray 6 feed sensor. If the sensor or lever is not properly functioning, replace the Tray 6 paper pickup assembly. 6. Use the Component tests to activate the Tray 6 solenoid (listen for the solenoid to activate). If the solenoid is not properly functioning, replace the Tray 6 paper pickup assembly. 7. Use the Component tests to activate the Tray 6 motor (listen for the motor to activate). If the motor is not properly functioning, replace the Tray 6 pickup motor.