Mã lỗi 65.X0.AZ — HP LaserJet M855xplus Enterprise
Code:
65.X0.AZ
Display: 65.X0.AZ Output accessory Failure
Description: Output accessory disconnected An external paper handling accessory connection has been interrupted. • 65.40.A0: Punch Unit disconnected • 65.50.A0: Folding Unit disconnected • 65.80.A0: Stapler/Stacker disconnected • 65.80.A1: Stapler/Stacker Unit connection interrupted • 65.90.A0: Booklet Make disconnected
Remedy: 1. Make sure that the latest firmware updates are installed for the engine and finisher. 2. Make sure that the finisher is grounded correctly. • Make sure that the finisher is latched and locked to the engine by tightening the thumbscrew inside the front door. • Make sure that the grounding-frame assembly (the bar with the wheel located between the engine and the finisher) is in the down position with the wheel touching the floor and that the grounding plate is not damaged. NOTE: The grounding-frame assembly is in the up position when the finisher is shipped. It must be lowered when the finisher is installed. 3. Make sure that the communication cable from the finisher to the engine is installed correctly. 4. Make sure that all packing materials have been removed from the paper handling accessory. 5. Make sure that the connectors on the PCA's for the device are fully seated and not damaged. 6. Only if the error persists and none of the previous steps correct the problem, replace the controller PCA in question.