Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 66.00.40 — HP LaserJet M880 Enterprise Flow

Code: 66.00.40

Display: 66.00.40
Description: NVRAM Error This is a finisher control board NVRAM error. The checksum for the finisher stacker controller PCA has an error when the power is turned on.
Remedy: 1. Turn the product off, and then on. 2. Make sure that the finisher is grounded correctly. • Make sure that the finisher is latched and locked to the engine by tightening the thumbscrew inside the front door. • Make sure that the grounding-frame assembly (the bar with the wheel located between the engine and the finisher) is in the down position with the wheel touching the floor and that the grounding plate is not damaged. NOTE: The grounding-frame assembly is in the up position when the finisher is shipped. It must be lowered when the finisher is installed. 3. Turn the engine power off, and then on to try to clear the error. 4. If the error persists, replace the stacker controller PCA.

← Xem tất cả mã lỗi HP LaserJet M880 Enterprise Flow

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie