Description: A jam is in the paper path. Media is detected inside the product. NOTE: The media was detected as the product was turned on or as any door was open and closed. Media might be detected by the following sensors: - Registration sensor (PS2) - Fusing-unit jam sensor (PS501) - Fusing-unit delivery sensor (PS502) - Tray 2 paper-feed sensor (PS1402) - Tray 3 paper-feed sensor (PS1403) - Face-down-bin delivery sensor (PS1451) - The duplexer residual paper sensor (PS2005)
Remedy: - Clear the jam. - Close the door to allow the product to attempt to clear the jam. - Run a paper path test. - Check the seating of the leaf springs under the high voltage power supply. - Remove the duplexer and check for media in the paper path. - Check the function of the duplexer residual paper sensor. - Replace the fuser.