Code: 30.01.11
Display: 30.01.11 ADF skew error
Description: A skew is detected in the ADF feeder.
Remedy: - Remove the skewed media in the ADF feeder, and close the ADF feeder. - Reload the document, and then press Start. - If the error persists, run the sensors diagnostic test to verify that the skew front and skew back sensors are functioning correctly. - Verify that J112 on the scanner control board, J701 and J704 on the ADF intermediate PCA, and J801 on the ADF sensor PCA are seated correctly. - Verify that the pickup roller, the feed roller assembly, the separation belt assembly, and the registration roller assembly are clean and undamaged.