Code: -
Display: Jam in cartridge area
Description: Photosensors PS913 (media width sensor), PS912 (top of page sensor) and PS915 (fusing assembly exit sensor) detect paper in the cartridge area of the product. If paper arrives at these sensors too early, leaves the sensors too late, or is present at the sensor when not expected, an error message is displayed.
Remedy: 1. Make sure that the paper meets specifications. 2. Open the top cover and remove the print cartridge. Remove any paper or paper fragments present. 3. Lift the registration flap. Make sure sensors PS913 and PS912 move freely. 4. Open the straight-through output door and verify that PS915 moves freely. 5. Make sure that the connector at J203 and J206 on the engine controller PCA are seated.