Code: -
Display: Jam in output bin
Description: This error occurs if the duplex reverse photosensor (PS918) or fusing exit sensor (PS915) detect unexpected paper.
Remedy: 1. Make sure that the paper meets specifications. 2. Open the rear duplex jamrelease door and clear any visible paper. Verify the duplex-release sensor flag moves freely. You might need a pen light to observe the flags. 3. Open the face-up output door and the verify the exit sensor flag in the fusing assembly moves freely. You might need a pen light to observe the flag. 4. Verify that the following connectors are seated on the engine controller PCA: . J208 duplex reverse . J206 fusing exit