Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 50.X — HP LaserJet P4014n

Code: 50.X

Display: 50.X FUSER ERROR
Description: A fuser error has occurred. The values for X are listed below. • 50.1: Low fuser temperature • 50.2: Fuser warm-up service • 50.3: High fuser temperature • 50.4: Faulty fuser • 50.5: Inconsistent fuser (verify voltage model) • 50.6: Open fuser • 50.7: Pressure release mechanism failure • 50.8: Lower fuser temperature • 50.9: High fuser temperature
Remedy: 1. Power cycle the product to determine if the error is persistent. 2. Verify that the correct fuser model is installed in the product. 3. Verify that the correct voltage fuser is installed in the product. 4. Verify that the fusing assembly is firmly seated in the product chassis. Reseat the fusing the assembly, and listen for a “click” at the end of the assembly when you insert it into the product. 5. Verify that the connection to connector J82 on the DC controller PCA is firmly seated. 6. Inspect the fusing assembly connectors, at the front of the assembly, and the connectors on the high-voltage power supply PCA. Look for bent pins or debris. Clean or straighten the pins if necessary. 7. If the error persists, replace the fusing assembly. 8. If the error still persists, replace the highvoltage power supply.

← Xem tất cả mã lỗi HP LaserJet P4014n

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie