Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 58.04 — HP LaserJet Pro MFP M426

Code: 58.04

Display: 58.04
Description: Low voltage power supply malfunction. The product has experienced an error with the low voltage power supply.
Remedy: 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. Check the voltage label on the back of the product. If the product is rated 220V and is plugged into a 110V outlet, this error might occur. In most cases, no damage is caused to the product. If a power transformer is used to convert 220V power to 110V, verify that the transformer power rating is sufficient to operate the product.4. If the error persists, replace the Low Voltage Power Supply PCB Assembly: M402, M403 L.V.POWER SUPPLY PCB ASS'Y (110v) RM2-8516-000CN M402, M403 L.V.POWER SUPPLY PCB ASS'Y (220v) RM2-8517-000CN M426, M427 L.V.POWER SUPPLY PCB ASS'Y (110v) RM2-8518-000CN M426, M427 L.V.POWER SUPPLY PCB ASS'Y (220v) RM2-8519-000CN5. If the error persists, replace the product.

← Xem tất cả mã lỗi HP LaserJet Pro MFP M426

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie