Code: 24.03:00
Description: The firmware has detected that one or more of the Top Covers Fans is not working
Causes: One or more of the top cover fans can be damaged. Top cover fan cable connector (from array) can be damaged (very low probability) .
Remedy: Call agent: • Restart the printer. Service engineer: 1. Revise if there are some Top cover fan that is not runing. 2. If none of the fans are working, this would indicate a failure with the PrintMech, or the cables from the Interconnect PCA: a. Check the cables from the Interconnect PCA. b. If all the cables from the PrintMech PCA to the fans are connected, replace the Printmech PCA. c. If message still present replace the Interconnect PCA. 3. If at least one of the fans is working, check if the failed fans are connected to the array, if it is connected replace the failed fan (Top Cover Fans). 4. If the error is not cleared, check all the cables from the failed fan to the PrintMech.