Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 81:03 — HP Latex 300

Code: 81:03

Description: It was impossible to correctly stop the servo before setting the encoder position
Causes: It was impossible to correctly stop the servo before setting the encoder position.
Remedy: Call agent: • Open the Window observing all safety procedures and check for any visible obstacles restricting the movement of the Drive Roller. If there is a wrinkled mass of substrate inside the paper path, lift the Pinchwheels (using the Substrate Lever) and clear the obstruction. Service engineer: 1. Perform the Substrate Path service test. 2. Replace the Substrate-Axis Motor.

← Xem tất cả mã lỗi HP Latex 300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie