Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10.01.03:01 — HP Latex 3000

Code: 10.01.03:01

Description: Contactor K3 does not switch state. The contactor K-3 is closed when it should be open, or open when it should be closed.
Causes: a. Contactor fault b. Feedback cable fault (from K-3 contacts 33/34 to e-cabinet PCA contact connector) c. E-cabinet PCA fault
Remedy: 1. Restart the printer. If the problem does not repeat, it is probably a firmware glitch. 2. If the problem persists, check that the cable from the 33/34 contacts of K-3 to the e-cabinet PCA is not damaged. If it is damaged, replace the cable. This affects the other contactors as there is only one feedback cable for all of them. 3. If the problem persists, replace the K-3 contactor. 4. If the problem persists, replace the e-cabinet PCA. See E-cabinet PCA.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie