Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10.03.04:19 — HP Latex 3000

Code: 10.03.04:19

Description: E-cabinet PSU-4 voltage too low. The PSU-4 voltage is too low.
Causes: a. PSU-4 voltage too low b. PCA malfunction
Remedy: 1. Reboot the printer. 2. Run the subsystem diagnostic. 3. If the problem persists: a. Disconnect the DC output cable from the PCA. b. Measure the PSU-4 output voltage with a voltage meter. c. If higher than 13V +10%, it is likely a PCA malfunction. d. Otherwise adjust the PSU-4 output voltage through its adjustment potentiometer with the help of a voltage meter. Voltage must be within 13V +/- 5%. e. If the PSU-4 cannot be adjusted, replace the PSU. See E-cabinet PSUs 1 to 4.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie