Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 10.10.01:01, 10.10.02:01 — HP Latex 3000

Code: 10.10.01:01, 10.10.02:01

Description: AC/AC converter 0X faulty signal detected. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative.
Causes: a. PSU malfunction b. Printer input voltage problem (usually temporary) c. Temperature too high d. Current too high
Remedy: 1. Run e-cabinet and drying subsystem diagnostics and check AC/AC LEDs and cabling. 2. Check whether the customer has power line problems at the site (usually this causes intermittent failures). 3. Check that environmental temperature and e-cabinet fan and filter are OK. 4. Check that there is no short-circuit in the AC/AC output.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie