Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 15.01.01:05, 15.01.02:05 — HP Latex 3000

Code: 15.01.01:05, 15.01.02:05

Description: Drying PCA 0X scan axis timeout expired. Reinitialize carriage to recover the system. If this doesn't work, run subsystem diagnostics, and if problem is confirmed call your support representative. The scan axis has been stopped with lamps on for a longer time than the safety threshold set by the firmware.
Causes: a. Problems with scan-axis control b. Problems with drying hardware or cabling c. Intermittent DS1 or DS2 behavior or cabling problem d. AC line power-quality problems
Remedy: 1. Reinitialize the carriage, run the scan-axis friction test, and oil the carriage if necessary. 2. Run scan-axis diagnostics and check the encoder strip. 3. Check drying cables. Run drying subsystem diagnostics. Check the encoder cable to the drying PCA and replace failing parts. 4. Check DS-X cabling. Run e-cabinet diagnostics, and replace a failing power supply if necessary. 5. Ask the customer’s power utility provider about recent changes.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie