Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 15.09.03:01 — HP Latex 3000

Code: 15.09.03:01

Description: Drying PCA 03 substrate crash sensor 2. Reinitialize carriage to recover the system. If this doesn’t work, run subsystem diagnostics, and if the problem is confirmed call your support representative. Crash sensor 2 is detecting an obstacle.
Causes: a. Printhead crash against the substrate b. Any obstacle in the carriage path c. Dirty sensor d. Faulty sensor
Remedy: 1. Check that the carriage can move freely without obstacles. 2. Clean the sensor. 3. Replace the sensor.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie