Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 16.21.01:01 ... 16.21.06:01 — HP Latex 3000

Code: 16.21.01:01 ... 16.21.06:01

Description: Curing module X chamber 2 temperature sensor failure. Module disabled, substrate going under this module won't be cured. But, if module is required to print, run subsystem diagnostic. If problem persists, call support.
Causes: a. Ambient temperature too high b. Not enough airflow in module c. Failure in temperature control
Remedy: Replace temperature sensor.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie