Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 22.10.01:30, 22.10.02:30 — HP Latex 3000

Code: 22.10.01:30, 22.10.02:30

Description: APS air pressure out of range 0X. Run IDS diagnostic. If problem persists, call your support representative.
Causes: Air pressure sensor valves have been detected as out of the expected measurement range. Expected pressure between -0.2 and 7 psi; for the system error to be triggered the condition must be repeated for 1 minute.
Remedy: 1. Check the connections of the air tube to the air pressure sensor in the ISS board. 2. Disconnect the tubes and perform a visual inspection of the system, in case of doubt blow into the tube to ensure there is no blockage towards the relief valve. 3. Replace the ink system main board.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie