Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 41.02.00:18 — HP Latex 3000

Code: 41.02.00:18

Description: Main roller motor’s driving voltage is too high.
Causes: a. Connection problem b. Substrate jam c. Transmission worn out d. Main roller motor or encoder problem e. EE driver failure
Remedy: 1. Reload the substrate to clear the error. 2. If the problem persists, check whether the motor fault LED is off. 3. Run the main roller (MA) motor diagnostic friction test. 4. If the motor is faulty, and after being restarted by firmware it remains faulty, then the motor electronics may be damaged. 5. If the roller has abnormally high friction, try cleaning and greasing the worm transmission and helical gear.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie