Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 47.00.00:50 — HP Latex 3000

Code: 47.00.00:50

Description: Wiper engage height error. Run subsystem diagnostics. If the problem persists, call your support representative.
Causes: a. The printer is detecting an error in the engage system. b. The cleaning roll is not properly set. c. Engage is not working properly. d. The height is wrong.
Remedy: 1. Check engage and roll. 2. Repeat calibration and run subsystem diagnostic.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie