Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 52.00.00:91 — HP Latex 3000

Code: 52.00.00:91

Description: Drop-detector bump switch not activated. Reboot in diagnostic mode and run subsystem diagnostic. If the problem persists, call your support representative and store printheads in their orange caps.
Causes: a. Bump is detected but bump switch is not activated. b. Drop-detector shutter friction is too high at some point, detecting a bump before reaching the bump switch. c. Bump switch is broken or disconnected.
Remedy: 1. Check that the drop-detector worm and sliders are clean and greased, and there is no high friction zone along its displacement. 2. If the drop-detector shutter reaches the switch but is not detected, check the cable and /or replace the bump switch.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie