Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 52.03.00:01 — HP Latex 3000

Code: 52.03.00:01

Description: Drop-detector encoder synchronization issue. Please run substsyem diagnostics. If problem persists, call your support representative. When performing drop detection, the printer performs synchronization with the linear encoder and the tail encoder located in the service-station motor in order to establish its position with respect to the dropdetector windows before performing the actual drop-detection action. This error indicates that this synchronization cannot be achieved as the readings from the two encoders do not match according to the movements performed.
Causes: a. Intermittent failure due to used printheads that are not in good condition b. Drop-detector linear-encoder sensor dirty, disconnected, or failed c. The drop detection tray cannot move smoothly due to excessive friction or a mechanical problem d. Incorrect calibration of drop-detector system e. Failure in the service station motor, motor drive PCA, DD MUX PCAs, or connecting cables
Remedy: 1. Check the nozzle health of the printheads. 2. Check the linear encoder strip in the service station. Make sure that the encoder strip is clean, correctly installed in the sensor, and correctly placed in its holders at each end. 3. Check the linear encoder sensor connection. Perform the drop-detector diagnostic test to check the linear encoder. If the test fails, replace the encoder system. 4. Grease the worm with a recommended grease, and make sure bushings are not damaged. 5. Check the functionality of the drop detector: œ Print the nozzle check. œ Cancel the drying time to save 10.15 minutes. œ If no failure is detected, there is no need to go further, the drop detector is working correctly, and the intermittent system error is due to the high usage of the printheads. 6. Perform a drop-detector calibration. 7. If there is no power (LEDs off), replace the e-box interconnect board. See E-box interconnect PCA. 8. Check the cable connections of the service-station system.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie