Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 52.05.12:04 — HP Latex 3000

Code: 52.05.12:04

Description: Motor driver PCA comm failure. Run subsystem diagnostic. If the problem persists, call your support representative.
Causes: a. Service-station interconnect: main interconnect board cable disconnected, pin connection fault b. Power not reaching the service station PCA (5 V pin 19 and 12 V pin 2, GND 20&1) c. Service-station Interconnect fault d. Main interconnect board failed e. Engine PCI bBoard f. Firmware error/corruption
Remedy: 1. Check the cable connections from the service-station interconnect board to the main interconnect board. Check for cable or pin damage. 2. Check that power is reaching the service-station interconnect (12 V and 5 V) (Power LEDs on). 3. If there is power (LEDs on) and no other failure is found, replace the service-station interconnect board and cable. 4. If there is no power (LEDs off), replace the main interconnect board. 5. Replace the main interconnect board. 6. Replace the service-station interconnect. 7. Replace the engine PCI board. 8. Reinstall the firmware and perform drop-detector calibrations. 9. Replace the hard disk drive.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie