Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 58.03.00:84 — HP Latex 3000

Code: 58.03.00:84

Description: SOL calibration failure. Calibration wasn't completed successfully. Run subsystem diagnostics. If the problem persists, call your support representative.
Causes: a. Calibration has failed. b. The printheads have a lot of blocked nozzles and the pattern is not printed properly. c. The sensor is faulty.
Remedy: 1. Check printhead health. 2. Repeat the calibration and replace the sensor if the problem persists. 3. Run subsystem diagnostic.

← Xem tất cả mã lỗi HP Latex 3000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie