Code: 03.10
Description: Power Supply error. A problem has been detected in the Power Supply
Causes: Power supply damaged. The 24/42V tensions are switched off. The "digital rails" fan has stopped. The "analog rails" fan has stopped. The voltage supplied to the carriage is out of specs. Problems with 5V line. Problems with 12V lin.e Problems with 42V line.
Remedy: Call agent: 1. Restart the printer. 2. Check the power supply LEDs status. If the blue LED is on (Digital rails OK but Analog rails not OK). Service engineer: 1. If the Power Supply Unit's blue LED is on, replace the PrintMech PCA. See PrintMech PCA. 2. Otherwise, replace the Power Supply Unit. See Power Supply Unit (PSU).