Code: 45:03
Description: Rewinder servo shutdown
Causes: Rewinder motor disconected. Rewinder motror damaged. Rewinder motor cable damaged. Interconnect PCA damaged (very low probability). PrintMech PCA damaged (very low probability).
Remedy: Call agent: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. pen the Window and check for any visible obstacles restricting the movement of the Drive Roller. If there is a wrinkled mass of substrate inside the substrate path, lift the Pinch Wheels and clear the obstruction. Service engineer: 1. Revise the Rewinder motor cable connections to Interconnect PCA. 2. Replace the Rewinder Motor. See Rewinder. 3. If the previous action did not work then, replace the PrintMech PCA. 4. If the previous action did not work then, replace the Interconnect PCA.