Mã lỗi 15.A0.02 — HP PageWide Enterprise Color 556
Code:
15.A0.02
Description: Input Jam, Tray 2 An input jam occurred from Tray 2 but sensor and condition are unknown. No Pick "Did not pick page from tray 2”. This jam occurs when the paper does not reach the Feed roller REDI sensor [1] for Tray 2 in designated amount of time after the start of paper pick-up from Tray 2.
Remedy: 1. Follow jam removal instructions on the screen.2. Clear all possible paper jam locations (Open paper cassette remove paper, open left door, remove ICU, lower flap, clear paper, raise flap, install ICU, close door).3. Verify the paper meets the specifications for the tray.4. Ensure that the tray width setting is set to your paper being installed into the tray. The arrow on the guide should line up exactly with the line connected to paper size designation.5. Make sure the tray is not overload above the marking shown on the tray side guide. 6. Check the Tray 2 pickup and feed rollers for wear, damage or paper dusk. Clean or replace the rollers as needed. Order P/N: CN598–67018 Separator Pick Assembly kit tray 27. Run Paper Path Diagnostics to move paper from tray to output bin (Administration / Troubleshooting / Paper Path Page).8. Replace the Mech Kit.