Remedy: 1. Turn the power off on the product by pressing the power button and holding it for more than 3 seconds. 2. Unplug power cord from back of product and wait 30 seconds. 3. Plug power cord back into product. 4. Turn the power on to the product using power button. 5. If the error condition is cleared then the issue is resolved, if not continue to step 6. 6. Repeat steps 1 & 2. 7. Remove the formatter, check formatter thoroughly for any loose connections and reseat them, then reinstall the formatter.8. Repeat steps 3 & 4.9. If the error condition is cleared then the issue is resolved, if issue is not resolved replace the Mech Kit.