Code: 04
Display: Engine Fuser Low Heat Error
Description: * The temperature of the Fuser is lower than the Printing temperature. * The Fuser harness is not connected properly.t
Remedy: 1. Check that the Fuser is installed correctly. • If not, re-install. 2. Check the AC power to the Fuser (Copper contact.) • If it is no good go to step 3 below otherwise go to step 5. 3. Check the Thermostat on the Fuser. • If it is open circuit replace the Thermostat. 4. Check that the Thermostat on the Fuser is properly positioned and assembled. • Replace the Thermostat if it is not. 5. Check both of the fuser Heat Lamps. • Replace any faulty lamps. 6. Check the Harness connected to the SMPS and Fuser. • Refit the harness or replace if damaged. 7. Replace the Main PBA. 8. Replace the SMPS.