Code: 09
Display: Image Transfer Error
Description: This is caused by a badly fitted or unlocked ITB unit or a faulty ITB Home Sensor.
Remedy: 1. Open Top Cover and then check that the ITB unit properly fitted and locked in position. • Remove, replace and re-lock the ITB unit. • If the same fault recurs regularly replace the ITB unit. 2. Check the condition of the ITB Harness (especially if replacing the ITB does not resolve the problem). • Refit or replace the harness if it is damaged. 3. Check the signal on Pin 1 of CN10 on the Main PBA. • Replace the Main PBA if the signal is Active low(almost 0V).