Code: 11
Display: Invalid Image Transfer
Description: Can not communicate with ITB Unit.
Remedy: *This may be caused by a wrong value of OEM Resistor in the OPC Unit. 1. Check that an original Samsung ITB Unit is fitted. • If not replace the ITB Unit. 2. Open the Top Cover and then check that the ITB unit is correctly locked in position. • Remove, replace and re-lock the ITB unit. 3. If the fault continues after re-fitting the ITB unit several times check the voltage on Pin4 of CN10 on the Main PBA. • Replace the ITB Harness if the voltage is not 5 voltage. 4. Replace the ITB Unit. 5. Replace the Main PBA.