Code: 03
Display: Dev. Motor Error
Description: The developer motor may stop working because of a harness or connector fault, increased torque in any one of the toner cartridges due to rollers sticking, a power supply fault or a fault on the main PBA.
Remedy: 1. Open the Deve Cover and check each Toner Cartridge to ensure that the rollers rotate. • Turn the rollers by hand and check how difficult it is to rotate the rollers. • Replace the toner cartridge if it seems excessively tight. 2. Open the Rear Cover and check if the Deve Motor Harness is assembled correctly. 3. Open the Main PBA Cover and check if the Harness (24pins) connected to the Deve Drive PBA is assembled correctly. • Replace the Harness if there are damaged or badly fitted parts. 4. Check the Power Supply to the Main PBA. • Replace the SMPS if the Power Supply is out of specification. • Replace the Main PBA if the Power Supply from the SMPS is OK.