Code: 05
Display: Engine Fuser Over Heat Error
Description: The temperature of Fuser is higher than the Printing temperature.
Remedy: 1. Check the Thermostat on the Fuser. • If it is open circuit replace the Thermostat. 2. Check that the Thermostat on the Fuser is properly positioned and assembled. • Replace the Thermostat if it is not. 3. Check the Harness connected to the SMPS and Fuser. • Refit the harness or replace if damaged. 4. Replace the Main PBA. 5. Replace the SMPS. Warning : You must replace the complete Fuser Ass'y if Over Heat Error has occurred. Do not replace only the Thermistor.