Code: 14
Display: Jam 0 In [Tray]
Description: Paper is caught in the tray.
Remedy: 1. Open the Duplex Cover and then remove the paper stuck in the machine. 2. Open the appropriate tray and after removing any trapped paper ensure that the tray is properly loaded, not overfilled and that paper guides are properly adjusted. 3. Check that the Feed Sensor is fitted correctly and is free to operate. 4. Use EDC Mode to check the operation of the feed sensor. 4. Check that the operation of the appropriate Pick-Up Clutch under the Cassette is normal. 5. If the Clutch does not work check the condition of the cable harness to the Main PBA. 6. Replace the Main PBA if the voltage on Pin 2 of CN32 (FCF) or Pin 2 of CN25 (MPF) on the Main PBA is +24VDC. (Normal Output : Pin 1 = +24VDC, Pin 2 = 0V)