Code: 08
Display: Waste Motor Error
Description: This error is caused by open circuit of Waste Motor Harness or the motor stalling due to increased Waste Motor torque during operation.
Remedy: 1. Open the Front Cover and then check if the Waste Toner Tank is full or the waste inlets are blocked with Waste Toner. • Replace the Waste Toner Tank and unblock waste inlet feeds. 2. Open the Top Cover and then remove the ITB Unit and OPC Unit and check if the OPC waste toner outlet is blocked. 3. Remove the Front Cover and then check the Waste Motor Harness. • Refit or replace the harness if it is damaged. 4. Remove the HVPS Cover and then check that the HVPS OEM Harness is correctly fitted. • Refit or replace the harness if it is damaged. 5. Measure the Voltage on CN2 Pin1 and Pin3 of OEM PBA. (Normal : Over +10VDC) • replace the OEM PBA if there is no output.