Description: LSU motor does not operate or it operates abnormally. Motor ready signal is abnormal.
Remedy: 1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up. 2) Print a demo page to check that the machine operates normally. 3) If the problem persists, check the following : • If the LSU motor makes a sound, a) Enter SVC mode to check the LSU motor ready signal. (Diagnostics > Engine Diagnostics > Engine Test Routines) - Press 1,2,3 number keys simultaneously. When the password dialog box appears, enter “1934” and press the “OK” button. b) Select “LSU Motor1 Run Ready”. ( Diagnostics > Engine Diagnostics > Engine Test Routines > 110-0000) c) Press ‘Start’ button. Check that the status has changed to ‘Executing -> Low -> High’. d) If the status has not changed, the motor ready signal is abnormal. Replace the LSU(JC97-04073A). • If the LSU motor does not makes a sound, a) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. (JC39-01743A : Motor Harness, JC39-01791A : Flat cable) Check that the LSU motor make a sound after turning the machine on. b) If the LSU Cable(JC39-01743A : Motor Harness, JC39-01791A : Flat cable) is defective, replace it. Check that the LSU motor make a sound after turning the machine on. c) If the problem persists, replace the LSU(JC97-04073A).