Display: Motor Failure: #. Turn off then on. Call for service if the problem persists
Description: Black toner is not supplied normally.
Remedy: • A1-5511 : Black toner supply motor is not operational but toner is supplied. • A1-5512 : Black toner supply motor does not operate. • A1-5513 : Black toner supply is stopped during operation. 1) Open the front cover. If the cyan toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 3) Enter SVC mode. Select the black toner supply motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 111-0030 : Toner Dispense Motor Black 4) If the motor is not operational, a) Remove the rear cover after removing 7 screws. b) Remove the main board shield. Measure the black motor power with DVM. i) If 24V power is generated, replace the black toner supply motor(JC31-00159A). ii) If 24V power is not generated, • Measure the 24V power on the SMPS board. If the SMPS board(JC44-00150B (220V) / JC44-00149B (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02516A).