Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi S3-3211 — Samsung CLX8650ND

Code: S3-3211

Display: Scan System Failure #S3-3211: Turn off then on.
Description: DADF board is not connected or communication error occurs between DADF board and Main board.
Remedy: 1) Turn off the machine then on. If the problem persists, check the following. 2) Turn the machine off again. 3) Remove the scan rear cover. Check if the connector on scan joint board is connected correctly. 4) Remove the rear cover. Check if the connector on the main board is connected correctly. 5) Remove the DADF rear cover. Check if the connector on DADF board is connected correctly. 6) If the connection is OK, replace the DADF board(JC92-02509A). 7) If the problem persists after replacing the DADF board, replace the main board(JC92-02516A).

← Xem tất cả mã lỗi Samsung CLX8650ND

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie