Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi M3-1411 — Samsung CLX9201ND

Code: M3-1411

Display: Paper jam in exit area.
Description: Paper jam has occurred around the fuser unit.(At power-on / warm up , the machine detected paper jam in Inner tray Exit Sensor.)
Remedy: • M3-1413 : The leading edge of the paper has not reached the feed 1 sensor within the specified time. • M3-1414 : The paper has not left from the feed 1 sensor within the specified time. 1) Open the side cover. Remove jammed paper. 2) If the problem persists, check the following: a) Open the side cover. Check if the connector is connected correctly. b) Remove the JOB-SEPARATOR. Check if the photo sensor is assembled correctly. c) Check if ACTUATOR-EXIT is assembled correctly. If the ACTUATOR-EXIT (JC66-02533A) is deformed or broken, replace it. d) If the photo sensor(0604-001393) is defective, replace it.

← Xem tất cả mã lỗi Samsung CLX9201ND

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie