Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi A3-3111, A3-3112, A3-3113, A3-3114 — Samsung CLX9251NA

Code: A3-3111, A3-3112, A3-3113, A3-3114

Display: Sensor Failure: #. Turn off then on. Call for service if the problem persists
Description: The NC sensor in the fuser unit is defective. / The sensor signal is abnormal due to a defective harness.
Remedy: • A3-3111 : Center NC sensor is in short status. • A3-3112 : Center NC sensor is in open status. • A3-3113 : Side NC sensor is in short status. • A3-3114 : Side NC sensor is in open status. 1) Enter SVC mode. Execute sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 109-0000 : Fuser Temperature A • 109-0010 : Fuser Temperature B 2) Remove and disassemble the fuser unit. 3) Measure the resistance value of the thermistor (1404-001453). If the measured value is out of 307KOhm - 430KOhm at 25C, replace the thermistor. 4) Install the fuser unit after replacing the thermistor. 5) If the error persists, replace the fuser unit (JC91-01063A(220V) / JC91-01064A (110V)). 6) If the error persists after replacing fuser unit, replace the main board(JC92-02429A).

← Xem tất cả mã lỗi Samsung CLX9251NA

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie