Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi H2-6706 — Samsung CLX9251ND

Code: H2-6706

Display: Finisher Failure: #H2-6706. Check finisher
Description: Transport motor doesn’t work.
Remedy: 1) Open finisher jam cover to check if there is a paper jam. If there is paper, remove paper manually. Then close door to do finisher initialization. 2) If transport motor is still not running and the error does not disappear, follow the instructions below: a) Does finisher transport motor work well? i) Make sure finisher transport motor cable is connected well to the transport motor connector. ii) Make sure finisher transport motor cable is connected well to the main board connector. iii) Replace the finisher transport motor(JC81-09677A). iv) Replace the finisher main board(JC81-09692A). b) Does finisher input sensor work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher input sensor(JC81-09686A). iv) Replace the finisher main board(JC81-9692A). c) Does finisher motor gear set work well? i) Make sure gear set can rotate smoothly. ii) Make sure each gear is not broken. iii) Replace the gear set(JC81-09592A / J81-09593A / JC81-09595A / JC81-09596A). d) Check if any debris is present. Please make sure to remove any debris.

← Xem tất cả mã lỗi Samsung CLX9251ND

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie