Code: 02
Display: DUPLEX COVER OPEN
Description: Orange light on. The duplex cover is open.
Remedy: 1) Check the harness connection between the SMPS board and the duplex cover sensor. (If the harness is out, insert it to the connector.) 2) In the Engine diagnostic mode, operate the duplex cover open sensor to see if the sensor is operating. (If it is not operating, replace the duplex cover open sensor.) 3) Check if the duplex cover open sensor is showing on/off from the normal operation of the duplex lever swing. (If it is not operating normally, replace the duplex lever swing.) 4) After closing the duplex cover, check to see if the CN307 of the SMPS board is outputting 24V. (If it is not showing appropriate voltage, replace the SMPS.)