Code: 05
Display: ENGINE FUSER OVER HEAT ERROR
Description: Orange light on The fusing unit temperature is higher than the printing temperature.
Remedy: 1) Check if the fusing unit is mounted properly. (If it is not properly mounted, remount it.) 2) Check for the harness between the SMPS and the fusing unit. (If the harness is out, insert it to the connector.) 3) Check for the harness between the paper size board and the thermistor. (If the harness is out, insert it to the connector.) 4) Check for the harness between the paper size board and the Engine controller. (If the harness is out, insert it to the connector.) 5) Check to see if the thermistor of the fusing unit is normal. (If it is not normal, replace the fusing unit.) 6) Check to see if the thermostat of the fusing unit is normal. (If it is not normal, replace the fusing unit.) 7) Check to see if the lamp of the fusing unit is normal. (If it is not normal, replace the fusing unit.) * Main Lamp (1-6 terminal): About 5.6 * SUB Lamp (3-6 terminal): About 6.8 8) Replace the Engine controller 9) Replace the SMPS.