Code: 19
Display: JAM 0 IN TRAY2
Description: Orange light on The occurrence of the paper Jam between the try 2 and the JAM 0 sensor. Open the left cover to remove the Jammed paper.
Remedy: 1) Check the connection between the Engine controller and the TA board. (If the harness is out, insert it to the connector.) 2) Check the harness between the TA board and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Engine controller and T2_Jam 0 sensor. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T2 Jam 0 sensor to check if the sensor is operating. (If it is not operating, replace the T2_Jam 0 sensor. 5) Check the damage or warping of the T2 Jam 0sensor actuator. (Replace the T2 Jam 0 sensor if it is damaged or warped.) 6) In the Engine diagnostic mode, operate the T2 Pickup motor to check if the motor is operating. (If it is not operating, replace the T2 Pickup motor.) 7) In the Engine diagnostic mode, operate the T2 SOL to check if the solenoid is operating. (If it is not operating, replace the Pickup unit.) 8) Replace the Engine controller.