Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 20 — Samsung ML3550N

Code: 20

Display: JAM 0 IN TRAY3
Description: Orange light on The occurrence of the paper Jam between the try 3 and JAM 0 sensor. Open the left cover to remove the Jammed paper.
Remedy: 1) Check the connection status of the SCF cable harness. (If the cable is out, insert it to the connector.) 2) Check the harness between the SCF controller and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Engine controller and T3_Jam 0 sensor. (Reflect Type) (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T3 Jam 0 sensor to check if the sensor is operating. (If it is not operating, replace the T3_Jam 0 sensor. 5) In the Engine diagnostic mode, operate the T3 Pickup motor to check if the motor is operating. (If it is not operating, replace the T3 Pickup motor.) 6) In the Engine diagnostic mode, operate the T3 SOL to check if the solenoid is operating. (If it is not operating, replace the Pickup unit.) 7) Replace the SCF controller.

← Xem tất cả mã lỗi Samsung ML3550N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie