Code: 21
Display: JAM 0 IN TRAY4
Description: Orange light on The occurrence of the paper Jam between try 4 and JAM 0 sensor. Open the left cover to remove the Jammed paper.
Remedy: 1) Check the connection status of the SCF cable harness. (If the cable is out, insert it to the connector.) 2) Check the harness between the SCF controller and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Engine controller and T4_Jam 0 sensor. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T4 Jam 0 sensor to check if the sensor is operating. (If it is not operating, replace the T4_Jam 0 sensor. 5) Check the damage or warping of the T4 Jam 0 sensor actuator. (Replace the T4 Jam 0 sensor if it is damaged or warped.) 6) In the Engine diagnostic mode, operate the T4 Pickup motor to check if the motor is operating. (If it is not operating, replace the T4 Pickup motor.) 7) In the Engine diagnostic mode, operate the T4 SOL to check if the solenoid is operating. (If it is not operating, replace the Pickup unit.) 8) Replace the SCF controller.