Code: 26
Display: JAM TA IN TRAY1
Description: Orange light on The occurrence of the paper Jam between the tray 1 Jam 0 sensor and the REGI sensor. Open the left cover and remove the Jammed paper.
Remedy: 1) Check the harness connected between the Engine controller and the T1 Jam 0 sensor. (If the harness is out, insert it to the connector.) 2) Check the harness between the REGI sensor and the Engine controller. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Engine controller and TA board. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T1 Jam 0 sensor to check if the sensor is operating. (If it is not operating, replace the T1_Jam 0 sensor. 5) In the Engine diagnostic mode, operate the REGI sensor to check if the sensor is operating. (If it is not operating, replace the REGI sensor.) 6) In the Engine diagnostic mode, operate the TA_1 sensor to check if the sensor is operating. (If it is not operating, replace the TA board.) 7) In the Engine diagnostic mode, operate the TA clutch to check if the clutch is operating. (If it is not operating, replace the TA clutch.) 8) Check the damage or warping of the T 1Jam 0 sensor actuator. (If it is damaged or warped, replace the ARM1 Jam sensor or ARM2 Jam sensor.) 9) Replace the Engine controller.